Just Me, You And The CPR

Categories Blog

Cardio Pulmonary Resuscitation (CPR) is required when a casualty has stopped breathing because they no longer have a flow of oxygen going round their body. The process requires a trained first aider to deliver chest compressions and rescue breaths to restore the flow, and avert brain damage. Hopefully help will be on hand, but in certain lonely situations CPR can be done with just one person. Knowing what to do in this situation is crucial.

It goes without saying that giving CPR on your own can be both a lonely and exhausting experience. However once it has been decided that someone has stopped breathing a logical protocol can be followed in preparation for the arrival of the emergency services.

Firstly it is crucial to call 999, which should take priority, and may involve leaving the casualty. Following this the first aider should give 30 chest compressions and then two rescue breaths, which should be repeated in a cycle until the arrival of the paramedics. If you have no access to a phone it has been scientifically proven that the casualty will benefit from one round of CPR before you leave them.

One of the main challenges in giving CPR to someone when you are on your own is overcoming tiredness. In order for chest compressions to be effective a first aider has to push hard on the sternum bone, which takes some effort. The actual process can also be very mentally draining, and require the first aider to remove themselves from the emotions of the event. Many heart attacks actually occur within the home so this is often next to impossible. Finally if you are on your own there is also the added pressure of coordinating the call to the emergency services, whereby you can expect them to arrive within eight minutes.

One of the biggest responses from the public when talking about CPR is for them to say that “I simply would not be able to do that”. It is very hard to picture how you would respond to a future stressful event that has not even taken place. Through talking to people who have administered CPR the wide consensus is that once thrown into the event it is common to just enter auto pilot mode.

One recent example of an auto pilot state is that of Josh Hill, who gave lifesaving CPR to his father when he noticed him collapse off the bed. Josh had taken a CPR class just three months before and knew exactly what was required of him. He is stated as saying that he picture his dad “like a resuscitation dummy”, which is a great example of removing yourself from the emotion of an event, and then focusing on what’s important.

Sometimes CPR doesn’t even get started because it is presumed that someone else will take the action or the professionals will soon arrive. In reality there may be a time in your life when you have to step forward and control a situation. There is no reason why more people can’t lead like Josh Hill and save a life. Remember the process is incredibly simple and involves repeating two simple steps over and over again. Josh reported it as being no different from his training, which millions of people taker annually worldwide.

Geoff Goond is a leading first aid instructor, and mountain rescue worker. Did you know you could give CPR on your own? If not then visit the emergency first aid course learning zone @ http://www.train-aid.co.uk for free tips.

Getting Started with Kickstarter

Categories Applications, Blog

Getting started with Kickstarter.com, a crowd funding website; requires understanding some basic principles. As we begin this series of blog posts on crowd sourcing funds for your business, product or service, it is necessary to give an overview of this popular source of investment capital. There are few who could, with integrity anyway, deny crowdfunding represents one of the most titanic shifts in business funding since Angel investment became main stream. Until recently, a few wealthy individuals largely controlled the flow of investment and decided who received it and who didn’t. Crowdfunding has not only blown this ‘good ole boy’ network out of the water but has allowed market access to tens of thousands of entrepreneurs and small businesses which otherwise wouldn’t have it.

Venture capitalists, Angel investors as well as the ever present banksters, were the gatekeepers and selected who succeeded and who languished in obscurity. When thinking back on how much innovation was stifled by the old saying “it’s not what you know but who”, we shudder to think how different the world would be had crowd sourcing been available to previous generations! As PCs and laptops brought information access to the masses, so too does crowd sourcing put funding at the fingertips of the ambitious among us. Although it remains a financial tool in transition, those who understand the true power of this instrument are surely rejoicing at the democratization of investment. The crowd is touted as a new innovation but truthfully, it is far from ‘hot off the presses’. There is an elite class which has used this tool for years, though calling it something quite different; political candidates. All politics and feelings of current President of the United States aside (Barack Obama), his 2008 presidential bid can accurately be called the most successful crowdfunding campaign in history. Millions gave amounts as small as $1 and when the 2008 presidential campaign was over and he elected, more than $850 million had been donated.

The principle of crowd sourcing funds is this; individual, smaller investors, contribute minute amounts of money to a business, campaign or cause. The many, collectively, make up a larger amount of investment which is then received by the campaign’s creator and used to execute planned objectives. Speaking from personal experience and having pounded the pavement to meet with larger investment groups, I believed our watch company, located at bannekerstore.com, would never see the light of day. For those having experienced the many more ‘downs’ than ‘ups’ with raising investment capital using more traditional approaches, you’ll understand when I say there are times when one feels like throwing their hands up and asking “is this idea really worth it”?

Of course, the answer is and has always been an unequivocal YES! Your idea, business or cause is much too important to leave in the hands of an elite few which, more often than not, over-promise and under deliver or worse; under-deliver and try and take over your business while treating you like an employee.

More than anything, crowdfunding gives the resources to bring great (not to mention profitable) business ideas to market and much more quickly than has been true in times past. But why is it so critically important? Many technical and complicated reasons could be offered but the crowd provides necessary investment without tons of strings attached allowing you to scale your business when and how you desire. Whether a project requires a few thousand dollars all the way up to $10 million or more, crowd sourcing platforms, of which Kickstarter is one, provides what is most important; platform and access. Let me be clear on one point which other writers seem not to understand; while we’d agree the crowd is a great testing place for market viability of an idea or cause, it should not be used as the entire measure. Too many entrepreneurs who’ve conducted campaigns and having been unsuccessful on the first attempt, get discouraged into believing because crowds didn’t buy-in, their idea is not worth pursuing. Nothing is further from true!

Unsuccessful campaigns can result from many things, a few of which are;

Idea, business, cause or project wasn’t presented correctly

The wrong platform (website) was chosen. Even if your first campaign is unsuccessful on Kickstarter, that never means it won’t be successful on other platforms such as Indiegogo.com

The right incentives (will be discussed in a future article) weren’t offered to contributors (the general public)

Not enough research was conducted

Length of campaign was either to short or long

More could be added but under no circumstances should lack of results, especially for the inexperienced, be taken as lack of market interest. Next, it also provides direct contact to shoppers and future customers of your business or cause. Those who contribute are, for all intents and purposes, future clients and customers and even better, can pass your sales plea along to their social network which may begin a virtually cost-free viral marketing campaign!

So what is most important when beginning the planning process? Your entire campaign should be based on a strong value proposition. One plague successful entrepreneurs suffer from more than the general public is the belief just because they are 100% bought in to the best business idea, others will be also. While sometimes true, it isn’t always. Getting buy-in, even for not so great crowd-funding ideas, is often about how it is presented. To begin, go to Kickstarter or other crowdfunding websites and examine top campaigns (by dollars raised). Pick several and answer this question; what makes them so compelling and more importantly, would you donate? Is the pitch so compelling you would pass it along to other social networks? The best value propositions are those you would give your hard earned money to and these should be, if not the idea, copied to maximize effectiveness.

Getting started with research should begin now so what are you waiting for?

Fast Information To Accepting Funds Online

Categories Blog

There are lots of methods of accepting funds online, some are simpler, some costlier, and some which provide methods to take online funds, and pay associates with out monitoring them yourself.

Accepting funds online can be a minefield and as the amount of on-line payment processors grows, the selection becomes harder as to which on-line fee processor to use. Here we weigh up the pros and cons of three of the highest online cost processors.

One of many biggest and most widely accepted methods of accepting cost online is to make use of Paypal. Anybody who has used Ebay is likely to have already come accross Paypal even if they have not signed up for an account. Paypal permits the online service provider to simply accept on the spot funds from customers both directly from the shoppers Paypal funds or from a credit card. This mixed with its excessive profile, and use by Ebay makes it a helpful payment processor to the brand new marketer online.

Paypal also offers you easy methods to create buttons and gross sales hyperlinks to promote your merchandise, and in the case of digital or downloadable products could be set to ship a buyer straight to the download page so your delivery work is finished automatically. The factor to keep in mind is the fees related to Paypal, as they take a proportion of every sale paid by them. The charges can quickly add up and knock a hole in your profits.

Another favorite cost processor with online marketers is ClickBank.com who also settle for bank cards in your behalf.

Clickbank is preferred to Paypal by some distributors as a result of its in-built associates program which also has many affiliates trying to find merchandise to promote for commissions.

Clickbank makes it simple to setup an associates program and pays your associates for you straight, and also can offer the instant downloads the same as Paypal. Because it already has a huge army of associates and people making search scripts to search out products in the Clickbank market it appears to be the answer to all your on-line gross sales needs, however unfortunately Clickbank have made it difficult to sell multiple product, so you need another account every time you want to promote something, or all your merchandise on one page for affiliates to send their potential shoppers to.

One other thing in Clickbanks favour is that they have recently started permitting cost from Paypal, in order that makes the cost choices extra varied for your prospects, and affiliate customers.

Clickbanks one drawback is which you can solely promote digital products by its system, so if you want to promote bodily products equivalent to books etc. then it is advisable to look elsewhere.

Another option is to make use of an online credit card processor such as 2 Checkout (AKA 2CO) which affords the consumer the ability to simply accept all kinds of bank cards, and is ready to be “plugged into” many procuring cart scripts to be used on websites. Though it gives no affiliate program itself, 2Checkout does not stop you using multi degree affiliate scripts, unlike Paypal, and Clickbank that are restricted on this respect. The place 2Checkout would not compare so favourably is in the fees charged for each transaction, however you do solely pay a one off fee to get an account in contrast to most bank card processors which cost fees and a monthly or yearly membership fee.

These are just among the decisions obtainable to the net marketer who desires to simply accept payments on-line, all have professionals and cons, however you have to take a look at what you need to do, and select one or two of these companies to begin promoting your products online. Use the one which most closely fits your corporation model, and budget, you’ll be able to at all times look at other ways to simply accept fee later, but these will get you started.

Microsoft’s Tablet OS

Categories Applications, Blog, Development

Microsoft has insisted on sticking with the historic Windows as the OS for its tablets, something that its CEO Steve Ballmer had pronounced with finality during his speech at CES. Now analysts, and plenty of people that sadly includes Microsoft employees, might be thinking that he is finally also running the company to the ground. Many outside the company known that a desktop OS is not what should be running a tablet.

The coming Windows 8 is the first tablet-oriented version of the Microsoft operating system family, pitting it against the giants Google and Apple. CEO Steve Ballmer himself admits that it is a risk, but still apparently believes so much in Windows to keep using it in every company exploit, an OS whose golden era many consider to be far gone. Despite touting support for ARM processors, which in turn provides sleeker tablet profiles and greatly improves battery life, many are still skeptical about Ballmer’s decision, likening it to someone who keeps using the same solution to a problem but expecting different results each time.

What many analysts agree on is that Windows is extremely resource and power hungry and expensive to the point of being out of any competitive price-range, the opposite of what any tablet is supposed to be. What Windows has done to the netbook market, pushing out Linux to replace it with their more expensive and bulky features that has destroyed any further consumer interest in netbooks, is what these experts are banking on for manufacturers to look back to so as not to fall for the same trap twice. The netbook experience with Windows 7 has not been good for that market and has almost completed killed it.

Ballmer has been criticized over the years for lacking vision and within whose term has lost major markets to Apple and Google, even waving away any consideration for potential within Microsoft’s ranks to rise above his beloved Windows. An OS named Courier was developed in 2009 by a Microsoft team as a lighter OS that does not use Windows code but has similar features and was liked by many outside the company, was shot down by Ballmer himself.

Currently, the CEO’s approval rating within the company is steadily declining, and his plans for a 2018 retirement might be sooner than expected, as even the company board is beginning to lose its patience with him. The departure of Ray Ozzie last year, where he talked about moving away from the desktop as the focus of the company, apparently has not taught the CEO the value of changing from the past.

Windows 8 is due for public beta-testing by the end of this year, pending a full version launch in 2012.

 

Track Who Views Your Instagram Profile

Categories Applications, Blog, Development, Tutorials

Sorry to damage your bubble, however none of those jobs. It’s currently simpler than ever before to locate an individual on Facebook, through different resources and also directory sites by merely making use of one’s name, whether for a job or individual factors. However, this does not function unless the cellular phone has a chip set up on it. The Internet is swamped with blog sites as well as YouTube video clips that assert to have a particular variety of solutions or functioning approaches to aid you open this function. Users running an organization web page might additionally intend to comprehend the variety of individuals seeing them. Orkut formally made this function readily available to its individuals. Unfortunately, Instagram stalker is rigorous when it concerns their customer plans, and also does not provide any type of such attribute currently. Whatever the factor, we’re presuming that you as well want to see that saw your Facebook account given that you discovered this web page. Alternatively, individuals might want to learn that inspected them out simply out of inquisitiveness or to obtain an approximate action of their appeal online provided the raising propensities people to look for recognition.

At this moment, Facebook will certainly not enable any type of solution or code on any person’s account that breaks the personal privacy of Facebook participants – which consists of the personal privacy individuals feel qualified to when they watch your account. 7. Facebook will certainly currently present the account web page of that specific customer. Who is examining your account and interested in you? Perhaps among one of the most frequently asked inquiries regarding Facebook is just how to examine that saw your account, and also naturally so. You might additionally select to report them to Facebook also. Overall the video camera carries out remarkably well at this cost array. Instead, message the individual back as well as pleasantly doubt they’re authentic. Once your collector mobile application approves individual information from the individual, it becomes your duty to protect the very same.

Source: https://imagerocket.net/

While no mobile application matches the energy of Google Docs on a desktop computer or laptop computer, this main variation for Android is quite close. Samsung Apps is an enhancing choice of applications specially made for the TV, linking you for your favored electronic details like movies, sporting activities tasks, on-line video games, social networking, and also substantially a lot more. Real guys understand these pointers on just how to make on your own a lot more eye-catching to ladies; comprehend these suggestions very closely, which remarkable lady that captured your focus could be your future partner. But extra on this in the direction of completion of this post. There is NO method to recognize that you watched your Instagram stalker Profile. However, we do have something that’s most likely the closest to learning that saw your account. Learning that has been watching your account after that ends up being a demand. Is It Possible to Check Your Facebook Profile Visitors Officially? So unless you understand a cyberpunk or are a CIA representative on your own, you can not see your account site visitors.

The Way To Download Pictures From Netflix?

Categories Blog, Deals

Our record has helped resolve your matter. Suggested Articles. Possessing a Netflix present card, but you’re confused regarding the way to redeem it? Enter the digital card information that you have from the TMW program, for example, First name, Last name, 16 digit card number, expiry date, and CVV, etc.. Accept for conditions and their terms and click the beginning Membership button. Your choice to reactivate your membership anytime, however, accounts profile data and details will be maintained after cancellation for ten months. Throughout the course of the following Month, 30 -31 times that you will have the choice of seeing everything from Netflix’s online library. In this manner, if you are switching to some other service, or visiting Netflix afterward, you will have a lot of titles that are hand-picked to start viewing and knock your watchlisting.

After you finish watching an episode, the service is enthusiastic about playing with the next installment. 12. How Can I Quit the Episode? It offers you a window to cancel, but otherwise, you’ll be torn from their credits and on another installment. To try it, go to Manage Profiles and click the profile that you wish to edit, then untick Autoplay installment and click on Save. Although you don’t want to use it together with Netflix or don’t have a credit card, however, wish to unlock a Netflix trial, then I will assist you. You might want to create a note of your watch list before canceling free netflix trial. Long time customers of Netflix might have a collection of documentaries, series, and films they would like to see, and they would hate to eliminate this list because of accounts receivable.

Visits : https://androidfix.info/netflix-free-trial/

Proceed to Handle Profiles, click and untick Autoplay previews whilst to surf on all apparatus. In the event, if you would like to find out more posts,s If you liked this, please make a comment below and discuss it with your teammates using your networking manages. Free Netflix Account and Password 2020 We know that Netflix is still among the very best streaming providers who provide streaming of many others, Hollywood films, and TV Shows. Scammers pretend to be or often use company names that are recognizable. Backing up your view list is simple – simply write the names down on the record or even better, have a screenshot.

Effective Technical Writing

Categories Blog, Tutorials

In over a decade of my technical writing experience, I have been rather amused to see how newbie technical writers execute their duties as a professional technical writer. Ironically although they possess knowledge of technical writing tools like Adobe Frame Maker or Robohelp, along with inborn writing skills, still somewhere they get lost when it comes to producing a well ‘constructed’ user guide or online help!

Yup, the word is ‘getting lost’! Many less experienced technical writer often forgot the fact that above all of their tools knowledge and writing skills, the most crucial aspect is ‘well constructed composition’! Many times even for small screens or modules, I have seen writers simply writing and writing without realizing the importance of ‘well organized composition’ of the content.

So what is well organized composition and how to achieve this goal? Well the answer is simple – trash the unwanted, focus ONLY on what is to be conveyed to the end user, and decide the most crucial element of all – the approach! As a technical writer you have to come up with a ‘approach’ that would help you organize and present the content of your document in a highly effective manner. For example, you have one new field that is being added to 10 screens. So you have to decide the approach on how are you going to present this new field to the end user? Are you going to mention it 10 times for all 10 screens? Or are you simply going to create a new chapter mentioning this new field and then simply place a reference link in all 10 screen chapter? Well the shorter, simpler and crispier is your approach, the better! Because users are impatient and want to have information as quick as possible! The best thing that the tools offer is the facility to add reference links! Reference links allows you to minimize the repetition of content and the length of your user guide as well! What is necessary to understand is when you write a user guide, you are providing information and at the same time you also are instructing the user on how to perform a specific function! So it is necessary that you gel both of these aspects and then present it in the simplest manner possible!

Remember as a technical writer you should understand that your end user is your student! He or she is completely unaware of the features that are you going to write about and hence it is very important for you to think of all aspects that will help you present your ‘story’ to the end user in the most effective manner. Well imagine or rather consider yourself as the Director of a movie! Yup, the movie (software) is written (coded) by the programmer, and now it is YOU who have been given this magnanimous task of ‘presenting’ this movie to the end user! So guess what would be your first stand? As a Director, the very first task would be to decide on ‘how to present’ this movie? What should be the ‘approach’? Many times a movie that has to be directed has many complicated sequences, just the way the software has many complicated screens or fields! But a seasoned Director knows how to present such complicated movies in a most effective manner! This is because he is a good analyzer! He breaks every aspect of the movie in bits and pieces, and then he analysis each piece of the movie and then comes up with a finalized approach! Similarly as a technical writer you have to break a module into pieces, analyze each of the screens and then come up with a finalized TOC (table of contents)! Once your table of contents is finalized then you are all set to start up with writing on each of the chapters!

Table of Contents is the blueprint of your approach! It displays How and Where you are going to mention features and functionalities of each module! Think like a ‘teacher’ or rather like a ‘friend’ when you write a user guide! Just imagine if your end user is standing next to you and asking you on ‘how to do, what to do, to get a desired outcome’ then how would you explain? Wouldn’t you try to explain it in the most easily understandable way? Wouldn’t you give one or two example, or demonstrations? Well certainly you would! So that is how you have to be when you are writing a user guide! Always imagine that your end user is standing next to you and asking you about a feature of the software and then start writing so that when you write you will be more sensitive to the end user needs and expectations! And eventually you will generate the most effective and usable user guide!

Thus to become an effective technical writer, some of the crucial aspects that you need to understand and implement are:

Analyze the features

Do not overload yourself with too much of information

Use only that information which needs to be conveyed in the user guide

Work on the ‘Approach’, try to ‘present’ the gathered information in simple, shorter and quicker way

Use Reference links wisely so as to minimize the repetition of content and as well as to generate a compact user guide which is not lengthy and boring!

 

Energy Harvesting- Charge your wearable technology with heat, sun, and vibration!

Categories Blog, News

As wearable technology gets more popular and smart clothing gets… smarter… one major challenge is going to be how we are going to power all this stuff! Sure, a glow in the dark LED snowboarding suit is cool, but the last thing you’d want to do is have to plug your smart jacket into an outlet to charge it up! Energy harvesting is going to become a much larger industry in the coming years, mark our words. In fact it’s estimated go grow from $605m in 2010 to $4.4bn by 2020! Check out some interesting clothing integrated energy harvesting possibilities for how you will be able to charge your wearable tech using the sun, heat, and good vibrations!

Harvest Those Good Vibrations
Piezoelectric vibration sensors are a mouthful to say but are already in use today in Nike’s smart shoes (not pictured) that wirelessly link to your phone or fitness tracker (like the Nike+ FuelBand perhaps…) and track your steps and speed. These sensors use constant movement to generate current to power a wireless link. They are particularly useful in running shoes where there is a lot of constant motion, but can also be woven into clothing to form a fancy capacitor that will store energy to power your devices. For a lower tech solution there is also the nPower PEG which harvests kinetic energy and charges an internal 1000mah battery that can be plugged into numerous devices to provide completely green energy!

Heat It Up With Thermal Sensors
Thanks to something called the Peltier effect, sensors can be placed around your body and detect the differences in your body heat to generate a current. By now most of us know you can get more power out of a dead battery by sticking it under your armpit for a while and heating it up. That isn’t the Peltier effect… that’s just gross. However, these thermal sensors can generate a current not only from your body heat, but from the difference in temperature on the inside and outside of a garment! These ‘thermopiles’ can already generate up to 2mW when walking around, which won’t charge your iPhone but is more than enough to power a health monitoring device or trickle feed some other piece of tech. These sensors can even be washed and ironed without having to worry about breaking them.

Solar Power To The Rescue
While themopiles and fancy vibration sensors are great for trickle feed a wireless connection or a low energy consumption piece of tech, sometimes you just need some serious energy production! This is where solar cells come to the rescue, and thanks to advances in flexible solar cells they can now be added onto clothing, jackets, backpacks, and more quite easily and even (dare we say it) stylishly! New solar cells have an increased efficiency so that they can generate power even from indoor lighting ‘low light’ conditions. And thanks to the advances in flexible lithium ion batteries that can be woven into clothing now, they can provide enough power to actually charge and power cell phones, LEDs, music players, and more.

As our clothing gets smarter and our energy needs get higher and higher, we can expect to see these new methods of harvesting energy becoming more common place. There’s no reason why these technologies can’t be used in tandem either, so before you know the days of plugging in your smart phone may be over and the days of being a living breathing energy generating power plant may be upon us!

Comparison Review: 2011 Ford Mustang vs 2010 Chevrolet Camaro

Categories Blog

Two giant auto names Chevy and Ford are at it once again. This time, these two iconic manufacturers are staging war in terms of who have got the better performing vehicle in the market.Ever since the launching of the Ford Mustang in 1964, the models built in with the V6 engine has failed to perform to expectations. Instead, they have been reduced to becoming merely a cheap option for daily transportation. Then came GM’s reboot of whole new 2010 Chevrolet Camaro and it set a whole new standard for engine performance with its 304-hp and 273 lb-ft torque V6 engine. For the first time, pony cars offered true power on the road without having to sacrifice fuel economy rating.

To further understand just how impressive the Camaro engine is, the 2011 Mustang GT offered a V8 engine that earned a rating of 315 horsepower, which is only slightly above the performance of the V6 engine for 2010 Chevy Camaro. This therefore irked the folks at Ford and this was to be the start of yet another intense phase in their rivalry.

Hence, they came up with new engines for the Mustang series that were due for release in 2011. some of these models will go on sale this year. The rebirth of the “5.0” V8 in 2011 mustang is the biggest news for Mustang fanatics, which claim to deliver some of the highest engine ratings the industry has seen thus far – 412 horsepower! The V6 also received some tweak of its own such that it can now deliver 305 horsepower and 280 lb-ft torque, which was slightly above that of the 2010 Camaro’s. But there are no changes in 2011 Chevrolet Camaro, it will come with same specs of 2010 Camaro. Only difference between 2010 Camaro and 2011 Camaro is official rating.

Some of the officials from Ford were asked to respond to rumors on whether the Mustang pony car was detailed and improved in an effort to compete with the Chevy model, they could not deny the fact. That admission therefore focused on a lot of attention on what each side is going to do next and that made a really interesting prospect for consumers.

Soon after Ford announced the numbers for the new mustang V6, GM followed it up with their own announcement. They have cited that their V6 engine will have its new official power rating for all of its future models, which is estimated at 312 horsepower and 278 lb-ft torque. Once again, 2010 camaro took the lead on this ongoing battle.

Again Ford stated that its 2011 V6 Mustang will give 31 mpg’s on the highway with a six-speed automatic transmission while Camaro gives 29 mpg with six speed manual transmission

When weight is concerned lightest V6 Camaro comes with hefty 3,719 pounds, while Ford’s calculation for the 2011 Mustang V6 is 3,473

How did GM achieve this and pull in 8 extra horsepower? It’s pretty simple. They have tested the Camaro V6 engine in accordance with the Society of Automotive Engineering to provide more certification to their engine offerings. Even the GM officials claimed that any step Ford was taking to further their efforts in this long-running competition only served to fuel GM’s desire to up their own.

It was getting clearer by the day that the ability to perform better than your closest rival is what motivates each party to improve on their engine design and performance. In addition, market trends also indicate that more horsepower also means more sales.

A Ford spokesman is therefore quick to point out that while GM has outdone them in terms of official horsepower rating, there are several aspects wherein Ford has the advantage. Ford officials argued that better horsepower does not automatically translate to better mileage. They cited transmission system, curb weight, and other such aspects that will impact the overall performance.

Regardless of which of these manufacturers win the battle, it was clear that the consumers are the true winners in this battle of the V6 models – 2011 mustang V6 and 2010 chevy camaro. It means they get to enjoy high performance without compromising fuel economy and price.

Protecting domain names with trademarks

Categories Blog, Tutorials

In a recent editorial by Internet Business Law Services, the organization reviewed the importance of protecting trademark based domain names. According to the article, there are two crucial documents drafted by Internet Corporation for Assigned Names and Numbers (ICANN) that protect domain name owners from trademark fraud.

The first document, “Uniform Domain Name Dispute Resolution Policy” (or Dispute Policy), serves as a dispute resolution tool to assist businesses in defending their domain names. The policy was implemented in 1999. The Dispute Policy protects registrars during trademark-based disputes and disputes arising from abusive registration of domain names (also known as cybersquatting). Top-level domain names with .com, .info, .org, .net, and .name are protected under the policy. It is imperative to note the terms of the Dispute Policy are automatically included within the registration agreement between the domain name holder and registrar. Per the Dispute Policy procedures, trademark-based disputes may be solved via arbitration, court action, or by agreement between the parties. Court action must be filed in a court with appropriate jurisdiction.

Overall, the ICANN Dispute Policy allows complainants to resolve specific controversies through administrative proceedings in front of an approved dispute-resolution service provider who is selected by the plaintiff. The complaint must be filed through an approved dispute resolution service provider. Resolution service providers can be found by visiting the ICANN web site.

According to the Dispute Policy, third parties must submit to the administrative proceedings when the plaintiff asserts one of the following to the service provider:

The third party’s (respondent) domain name is identical or confusingly similar to the trademark or service mark in which the complainant has rights.

The third party (respondent) has no rights or legitimate interest in respect of the domain name.

The third party’s (respondent) domain name has been registered and is being used in bad faith.

It is the plaintiff’s responsibility to support his or her argument. The third party is not allowed to transfer the domain name in question during these administrative proceedings.

The second document provided by the ICANN to assist in protecting trademark rights is the “Rules for Uniform Domain Name Dispute Resolution.” Often referred to as “Dispute Rules,” these procedural rules are applicable to domain name controversies solved via the Dispute Policy. The rules were founded in 1999 and are the required rules for the ICANN administrative proceedings. The rules establish the requirements of the grievance; necessitate proper notice to third parties of grievances filed against them and provides examples of proper notice; and determines the requirements of the third party’s answer. The response must then be filed within 20 days of the beginning of the scheduled administrative proceedings. If this is not done, the panel will provide a default decision.